ThinkSystem SR630 V4 8x2.5" SAS/SATA Backplane Option Kit
See this document for information about the ThinkSystem SR630 V4 8x2.5" SAS/SATA Backplane Option Kit.
This option kit comes with the following components.
1 One 8x2.5" SAS/SATA backplane with bracket
2 One 4x2.5" HDD filler
3 Four 2.5" HDD fillers
4 One ThinkSystem 1U 2x2.5" fixed filler
5 Drive sequence/type label
- One 1U MS 8x2.5" SATA/SAS HDD type label
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to "Install the front 2.5-inch drive backplane" in SR630 V4 User Guide.
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925